Free Online Tools

Free Custom Patch Tools

Design a name patch, find the right patch size and learn how to iron on a patch, then get a free mockup before anything goes into production.

Send This Design for a Free Mockup

We reply with your free mockup, usually within 12 to 24 hours. The preview is a guide; final colors, thread and sizing are confirmed in the mockup.

Recommended custom patch size
3.5 x 2.5 in
The box is a rough guide, not the real size on screen.

Send This Size for a Free Mockup

We confirm the exact size in your free mockup, usually within 12 to 24 hours.

How to Choose the Right Custom Patch Size

The right size depends on where the patch goes and how much detail it needs. A patch that is too small loses its detail, and one that is too large looks out of place on the item. This patch size finder, one of our custom patch tools, gives you a starting point based on common sizes for each placement. Our mockup then shows the real proportions before anything is made.

  • Hats and caps: about 2 to 2.5 inches tall and 3 to 4 inches wide.
  • Chest or pocket: about 3 to 4 inches wide.
  • Sleeves: about 2 to 3 inches.
  • Bags and backpacks: about 3 to 4 inches, or larger.
  • Jacket backs: about 10 to 12 inches wide.
  • Name patches: about 1 to 1.5 inches tall and 3 to 4 inches wide.

For the full guide, read our custom patch size guide.

Check the care label on your item too. Heat tolerance can differ from one garment to another.

Order Custom Patches With Iron-On or Sew-On Backing

Minimum order 5 pieces. Free mockup, usually within 12 to 24 hours.

How to Iron On a Patch: Quick Steps

  1. Prepare the fabric. Wash and dry the item without fabric softener, and iron out wrinkles where the patch will go.
  2. Place the patch. Position it, glue side down, on a flat, hard surface.
  3. Cover and press. Cover the patch with a thin cotton cloth. Set the iron to the cotton setting with steam off, and press down firmly for about 30 to 45 seconds without sliding.
  4. Press the back. Turn the item inside out and press the back of the patch area for another 20 to 30 seconds.
  5. Cool and check. Let the patch cool fully, then check the edges. If a corner lifts, cover it and press again for a few more seconds.

This iron-on guide is one of our free custom patch tools, and it uses the same steps as our guide. For the full steps, read our guide on how to iron on patches and our post on iron-on embroidery patches. For the strongest hold, you can also sew on a patch after ironing.

How Our Custom Patch Tools Work

  1. 1Pick a tool: name patch maker, size finder or iron-on guide.
  2. 2Choose your options and see the result instantly.
  3. 3Send it to us. We prepare a free mockup, usually within 12 to 24 hours.
  4. 4Approve the mockup. Production takes 12 to 14 days, and shipping is free worldwide.

These custom patch tools are free to use, no sign-up is needed, and they help you plan an order before you spend anything. Patches have been used for centuries to mark identity and belonging, and you can read more about embroidery if you are curious how stitched designs work.

Use Custom Patch Tools to Make Name Patches Easy to Read

A name patch is small, so every letter has to be clear. This custom name patch maker, like all our custom patch tools, checks the two things that matter most: color contrast between the text and the patch, and the letter height on the finished patch. If something will be hard to read once stitched, the tool tells you before you order.

  • Use bold, simple fonts. Thin script fonts fill in with thread and become hard to read.
  • Choose strong contrast. White on navy, black on yellow and white on dark green are reliable.
  • Keep letters at least 0.25 inch tall on an embroidered patch. Use a woven patch if you need smaller text.
  • Give long names a wider patch so the letters do not shrink.

Want more detail? Read our guide to custom name patches, the custom patch size guide and the comparison of embroidered vs woven patches.

Where People Use Our Custom Patch Tools and Name Patches

  • Work uniforms and jackets: staff, security, service and delivery teams.
  • Schools and sports teams: bags, jerseys and team jackets.
  • Hats, aprons and bags: short names and titles that need to be seen at a glance.
  • Clubs, crews and events: matching patches for every member.

The minimum order is 5 pieces, so a small team or a single family can order without buying in bulk. For larger groups, see our bulk orders page.

Why Use Custom Patch Tools Before You Order?

Most mistakes with a custom patch order happen before production starts: a font that is too thin, a patch that is too small for the design, or a backing that does not suit the fabric. Our custom patch tools help you catch these problems early, at no cost and with no sign-up.

Each of the custom patch tools on this page answers one practical question. The name patch maker shows how your text, shape and colors will look. The patch size finder gives a starting size for a hat, chest, sleeve, bag or jacket back. The iron-on guide tells you whether your fabric suits an iron-on patch or needs sew-on backing. Together, these custom patch tools take the guesswork out of planning.

When you are happy with a result, send it to us. We turn your choices into a free mockup, usually within 12 to 24 hours, and nothing goes into production until you approve it. The minimum order is 5 pieces, and shipping is free worldwide, including the USA. If you want to learn more before you start, read our guides on custom patch sizes and the best backing for custom patches.

Whether you need a few name patches for a small team or hundreds of patches for a larger group, these custom patch tools are a quick way to get your idea ready for a quote.

Custom Patch Tools FAQs

What are custom patch tools?

Custom patch tools are free online tools that help you plan a patch order. Our custom patch tools let you preview a name patch, find the right patch size and check if a fabric suits an iron-on patch.

Is the custom name patch maker free?

Yes. Designing your patch here is free, and every quote includes a free mockup before production.

What is the minimum order for custom name patches?

The minimum order is 5 pieces. You can order a different name on each patch.

How long does it take to get my name patches?

The free mockup usually arrives within 12 to 24 hours. After you approve it, standard production takes 12 to 14 days, with a faster 7 to 10 day option. Shipping is free worldwide, including the USA.

What size should a name patch be?

Most name patches are about 1 to 1.5 inches tall and 3 to 4 inches wide. Longer names need a wider patch so the letters stay readable.

Which is better for names, embroidered or woven?

Embroidered patches have a raised, classic look and suit bold, short names. Woven patches use finer thread, so they suit small text and long names.

What size should my custom patch be?

It depends on the placement: about 2 to 2.5 inches tall for a cap, 3 to 4 inches wide for a chest, 2 to 3 inches for a sleeve and 10 to 12 inches wide for a jacket back. Use the Patch Size Finder for a starting size.

How small can the text be on an embroidered patch?

Text should be at least about 0.25 inch (6 mm) tall on an embroidered patch. Woven patches use finer thread and can show smaller text.

How long should I iron on a patch?

Cover the patch with a thin cotton cloth, use the cotton setting with steam off, and press firmly for about 30 to 45 seconds. Then turn the item inside out and press the back for another 20 to 30 seconds.

Which fabrics are not suitable for iron-on patches?

Nylon, leather and waterproof or heat-sensitive fabrics are not recommended. Thin polyester and stretchy sportswear need care. For these, sew-on backing is the safer choice.

Can I use my own logo or font?

Yes. Send your logo or font details with your request and we will match them in the mockup.

Ready When You Are

Turn Your Design Into Real Custom Patches

You have used our free custom patch tools to plan your design. Now let us make it. Send us your choices and we will prepare a free mockup, usually within 12 to 24 hours.

  • Minimum order of just 5 pieces
  • Free mockup before production, nothing is made until you approve
  • Embroidered, woven, PVC, chenille, leather and sublimated patches
  • Free shipping worldwide, including the USA
custom patch tools: name patch maker, patch size finder and iron-on guide